How to Clean and Care Your Vacuum Sealer at home?

A vacuum sealer is a useful kitchen tool that prevents food from rotting or going to waste. It is typically used specifically for sealing coffee beans, snacks, or other clay food after sealing the bag. When the air inside is removed, the sealer’s heat is used to seal the bag, so it helps extend the shelf life of the food.

For the long-term use of a vacuum sealer in your kitchen, you need to maintain and clean it properly. The cleanliness of the vacuum sealer is vital to preserve and protect against rust or cracking, thereby increasing durability. If you are unsure of how to clean and care for a vacuum sealer without expert assistance, you have landed on the right page. Here are some cleaning and care tips you should keep in mind after cleaning and storing the vacuum sealer.

Tips for cleaning Vacuum Sealer at home

1. Take all safety precautions

When it comes to appliance cleaning, safety is the foremost yet biggest aspect. your safety is major concern before you do anything, meaning you make sure the vacuum sealer has been unplugged from the outlet. Furthermore, allow your vacuum sealer to cool down instantly after unplugging and before cleaning.

Additionally, do not submerge any hardware or tool of the sealer, power cord, or plug inside the water. Though, it can put your life in danger or cause major health issues. So, make sure you take all essential safety precautions and be careful while performing cleaning tasks.

2. Check hoses, gaskets and drip tray

Don’t forget to check the drip tray, gaskets, and hoses as you begin cleaning the vacuum sealer. You need to ensure that these accessories do not carry any residue or material on or inside them. Once you’re sure these parts are free of leftovers or that you’ve picked up any residue, wipe them off. Dip a cloth into the warm soapy solution to thoroughly clean the drip tray and gasket. Note that you did not remove the upper gasket when cleaning the Food Saver Tool, as you could crack your tool.

3. Make sure the Drip tray has liquid already

Next, you need to check out the removable drip tray inside the FoodSaver. Remember, the liquids left over during the vacuum process in the tray make cleanup easy with minimal effort. So, you should check that there is a small amount of fluid inside the tray. If you find liquid already in there, let it make cleaning an easy task for you in no time.

4. Rub and Rinse Dip Tray

You also need to empty and clean the dish tray with warm soapy water after use. Once the cleaning is done, place it inside the dishwasher to dry completely. After drying the drip tray, set it in place in the vacuum sealer. Also, when you are done setting up and cleaning your vacuum sealer, you should leave the sealing lever in the unlocked position. That mean, you can use your appliance with great ease.

Tips to Remember:

• Never use harsh chemicals, as it increases the chance of the food being contaminated and might risk the overall appliance.
• Don’t submerge the sealer in water because it might harm the inner parts of the appliance.

Vacuum Sealer Upkeep and Maintenance Tips that you need to follow:

Cleaning isn’t just enough to protect from being damaged. Proper care, upkeep, storage, and maintenance are also required. The tips below will ensure the best upkeep of your vacuum sealer. Let’s quickly take a look:

1. Regular Vacuum Sealer Cleaning is a must

As we said earlier, vacuum sealers are used to seal raw and fresh foods. But, they are prone to contamination and require frequent cleaning. Once the vacuum sealer requirement is fulfilled, you should clean it thoroughly. With proper cleaning, you will prevent bacteria, dust, or other unwanted elements from getting in and out of your appliance. If possible, you should wipe down all vacuum sealer tools after each use to prevent this from happening.

2. Avoid using harsh chemicals to clean FoodSave appliance

When cleaning your appliance, get rid of cleaning products that contain chemicals. Typically, this device is used to seal packaged foods that will be consumed in the future, so it is important to avoid chemicals. Hazardous washing solutions mostly contain toxic chemicals that can put your life at risk by affecting your health. For this reason, always read cleaning product labels to make sure the products will not come into contact with hazardous chemicals. Hence, you are advised to use mild soaps as they will eliminate the chances of any health problems.

3. Never use wet Clothes when cleaning your Vacuum Sealer Machine

Another great tip for you is to avoid using a wet cloth while cleaning your vacuum sealer. A wet cloth filled with water increases the risk of water dripping into the electrical parts of the appliance. So alternatively, you can use a damp cloth to wipe down the device to prevent damage and keep it safe from electric shock. Before starting the cleaning process, we already asked you to unplug the device because of safety.

4. Make sure no residue is left behind after use, cleaning and storage

No soap residue or sealing residue should be left before and after each use. If found, remove it immediately. However, any food or cleaning residue has prone to growing bacteria that lead to many health problems. Remember, soap or foaming adds dust and dirt to leftover equipment if you don’t remove it properly. Therefore, you are advised to wipe the machine with a dry cloth to clean the vacuum sealer thoroughly. Using a dry sealer can reduce the risk of growing potential health problems and damage to the appliance.

Wrap Up!

Preserved food products may rust or lose their flavour and taste if oxygen or air enters the sealed bag. For long-lasting usage of vacuum sealers, they should be in the best possible condition. The above care and cleaning tips will help you safely and effectively maintain the lifespan of an appliance and eliminate any risk of damage, electric shock and bacterial infection.